Alto-professional Live 802 Manuel d'utilisateur télécharger pdf (Page 5)

17. Aux Send: Use 1/4" TRS cables to

connect these outputs to the inputs of

an external amplifier or active monitor.

Use the Monitor Knob (Mon) on each

channel to control the level of the signal

sent to Aux Send 1. This is useful for

creating a custom monitor mix for

onstage musicians.

18. Aux Return (Aux Rtn): Connect the

outputs of an external device to these

inputs with 1/4" mono cables. If your

source is mono, plug it into the left jack

and it will be heard on both the left and

right sides.

19. Aux Return Fader (Aux Rtn): Controls

the audio level sent into the Aux

Return (Aux Rtn) inputs.

20. Graphic Equalizer: When the EQ

On/Off switch is on (depressed), you

can use these controls to adjust the

equalization of the main mix.

21. EQ On/Off: Enables or disables the

Graphic Equalizer.

22. Main Out / Monitor Out: When this

button is raised, the Graphic Equalizer

will affect the signal sent to the Main

Mix Outputs. When this button is

depressed, the Graphic Equalizer will

affect the signal sent to the Aux 1

(Mon) Output.

23. Effect Selector: This knob determines

what effect the mixer's internal effects

processor will apply to the various

channels. Turn the knob to change the

effect number, and push the knob to

select it. The display next to the DFX

Mute button will show the preset

number. Each channel can send

different levels of audio to the

processor by adjusting its DFX Knob.

See the Effects section for an

explanation of the available effects.

24. DFX Mute: Press this button to

mute/unmute the effects.

25. DFX Peak LED: The LED will flash if the signal is clipping. If this happens, decrease the

setting of your source channels' DFX Knobs. When the effects processor is muted, the

LED will be solidly lit.

26.

DFX Return Fader (DFX Rtn

): Adjusts the volume of the audio sent from the mixer's

effects processor.

27. DFX Bypass: You can connect a standard 1/4" latching-style footswitch (sold separately)

to this input and use it to bypass the mixer's internal effects processor (when the

footswitch is in its "closed" position).

21 22

303234

14 14 14 14

35 36

1 2 3 4 5 6 7 8 9 10 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Alto-professional Live 802 Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Alto-professional Live 802