Alto-professional TMX80DFX Manuel d'utilisateur télécharger pdf (Page 28)

TECHNICAL SPECIFICATIONS

INPUT CHANNELS

• Microphone Input: electronically balanced, discrete input configuration

• Frequency response: 20 Hz to 22 kHz, +/ 1dB

• Distortion (THD + N) 0.005% at +4 dBu, 1 kHz

• Signal to Noise Ratio: 115dB

• Line input Electronically Balanced (SW to LINE)

• Frequency response 20 Hz to 22 kHz, +/ 1 dB

IMPEDANCES

• Microphone input: 3.9 kOhm

• All other inputs 10 kOhm or greater

• Tape out 1 kOhm

• All other output 120 Ohm

POWER SECTION

• SPK. OUT- Distortion ( at 1W & 1 KHz) <0.1% Distortion (at 100 W & 1KHz) <0.15%. Frequency

Response (at 100W) 20Hz to 22KHz, +/-2dBu SNR(LINE IN) >100dBu

• Inrush Current at initial switch on: 6.20A

• Inrush Current after power supply interruption: 4.02A

CONTINUOUS POWER (1kHz, THD 1%)

• 2x350W @ 4 Ohm

• 2x180W @ 8 Ohm

POWER EIAJ (1kHz THD 1%)

• 2x400W @ 4 Ohm

• 2x200W @ 8 Ohm

THERMAL PROTECTION

• Over-temperature power limiting

• Thermal shutdown

• Temperature controlled 12V DC fan output

SHORT PROTECTION

• Short-circuit protection

• Overload output protection

VOLTAGE PROTECTION

• Over voltage protection

• DC offset shutdown

POWER SUPPLY

• 100V~50/60Hz, 110-120V~50/60Hz, 220-240V~50/60Hz

• 100V: T12AL AC250V, 110-120V: T12AL AC250V, 220-240V: T6.3AL AC250V

• Inrush current after inital switch-on: 6.20 A

• Inrush current after power supply interruption: 4.02 A

DIMENSIONS (H x W x D)

• 133mm x 322mm x 259mm; 5.2” x 12.6” x 10.2”

NET WEIGHT

• 4.8kg; 10.5lbs

www.altoprofessional.com

MANUAL VERSION 1.1

1 2 ... 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

Alto-professional TMX80DFX Manuel d'utilisateur Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Alto-professional TMX80DFX