Alto-professional Stealth Wireless Expander Pack Manuel d'utilisateur télécharger pdf (Page 7)

Dual Channel Setup

To send stereo signals through the Stealth Wireless transmitter to 4 receivers:

1. Connect your mixer’s main outputs to the input channels on the Stealth Wireless transmitter, and

connect the Stealth Wireless receivers’ outputs to your loudspeaker’s inputs.

2. Connect your Stealth Wireless Expander Pack receivers outputs to your loudspeakers inputs.

Keep all mixer volume and transmitter Trim controls at a minimum.

3. Power on the Stealth Wireless transmitter and receivers. Set their channels to matching numbers.

4. Adjust the transmitter and receivers antennas to a vertical position.

5. Set the transmitter to “stereo” and adjust the Trim controls to get a strong signal without clipping.

6. Turn on your loudspeaker, adjust the output level of your mixer, and adjust the Trim controls on

the transmitter to hear the audio signal. If you hear noise in the signal, change to a different

channel until a clean signal comes through.

Transmitter

Powered

Speaker

Powered

Speaker

Mixer

This diagram shows the

signal flow from a mixer,

through Stealth Wireless,

to speakers.

Stealth

Wireless

Receivers

Stealth Wireless

Expander

Pack Receivers

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Pas de commentaire

Alto-professional Stealth Wireless Expander Pack Manuel d'utilisateur Page 7