Alto-professional Live 2404 Manuel d'utilisateur Page 6

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 48
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 5
6
24. Control Room Outputs
(Ctrl Out): Use standard
1/4" TRS cables to
connect these outputs to
your control room
(booth) monitors or
amplifier system.
25. Su/jointfilesconvert/1710131/bgroups Outputs: Use standard 1/4"
TRS cables to connect these outputs to
your monitoring amplifier system, and
control their levels with the Su/jointfilesconvert/1710131/bgroup
Faders. You can use these outputs for
group processing or for sending certain
channels to a destination other than the
Main Mix.
26. 2-Track Inputs (2 Track In): Connect
these inputs to the outputs of an external
sound source using a standard stereo
RCA cable (sold separately). Use the 2
Track In Source button to send this
signal either to the Main Mix Outputs or
to the Control Room Outputs (Ctrl Out).
27. 2-Track Outputs (2 Track Out): Connect
these outputs to the inputs of an external
recording device using a standard stereo
RCA cable (sold separately).
28. Aux Send: Use 1/4" TRS cables to
connect these outputs to the inputs of an
external amplifier or active monitor. Use
the Aux Send knobs on each channel to
control the level of the signal sent to these
outputs. This is useful for creating a
custom monitor mix for onstage
musicians.
29. Aux Sends Knobs: Use these knobs to
control the overall level of the signal sent
to the Aux Sends. (Use the Aux 1-4
Knobs on each channel to control the
signal sent here from each channel.)
30. Aux Sends Solo: Depress these buttons
to solo that channel in the Phones
Outputs.
31. Aux Return Knob (Aux Rtn): Controls the
audio level sent into the Aux Return (Aux
Rtn) inputs. The first and second knobs
control the Aux Return levels sent to the
Main Mix.
32. Aux Returns to Aux Sends: Use these knobs to control the level of the signal sent from
the corresponding Aux Return to the Aux Send bus with the same number. This is helpful
when using cascading mixers (e.g., sending the submixer's Aux Sends to this mixer's Aux
Returns, allowing the submixer's Control Room Mix to be sent to this mixer's su/jointfilesconvert/1710131/bgroups
and then into its Control Room Mix).
2444
59
28
29
30
31 32 46
47
49
45
48
45
3231
31
33
34
34
35
51 51 51 51
50 50 50 50 52
53
54
55
56
57
58
31
30
30
30
29
29
29
28
36
37 38
39
40
41
42 43
42
25 25
26 27
Vue de la page 5
1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Commentaires sur ces manuels

Pas de commentaire