Alto-professional TS110A Manuel d'utilisateur télécharger pdf (Page 2)

BOX CONTENTS

• TRUESONIC speaker

• Power cable

• Quickstart Guide

• Safety Instructions & Warranty Information Booklet

CONNECTION DIAGRAM / INSTALLATION

REAR PANEL OVERVIEW

1. POWER INPUT – Connect the included power

cable to this input and connect the other end of

the cable to a power source. Make sure the

speaker's POWER SWITCH is set to "off"

when plugging and unplugging the cable.

2. POWER SWITCH – Turns the speaker on/off.

Make sure the VOLUME knob is set to "zero"

before turning it on.

3. POWER LED – Illuminates when the speaker

is on.

4. VOLUME – Turn this knob to adjust the

speaker's volume.

5. INPUT – Use a standard 1/4" TRS or XLR

cable (not included) to connect your sound

source to this input.

6. MIX OUT – Use a standard XLR cable (not

included) to connect this jack to the input of

another speaker (i.e., another TRUESONIC

speaker).

7. SIGNAL LIMIT LED – Illuminates when the

audio signal being sent to the speaker is

"clipping" or distorting. If this light illuminates

frequently or steadily, reduce the volume of your sound source.

8. CONTOUR – Engage (depress) this switch to equalize the mix for optimal music playback. Disengage

(raise) the switch during live performance for a flatter response.

9. GROUND SWITCH – Press this switch to reduce hum or noise.

Note

Microphones, mixer,

and cables are not included.

Mixer*

Power

Microphones*

Speaker

Eyebolt

Dust cover

Suspension

point

Example:

INSTALLATION:

This speaker should be installed on a

stand on the floor, according to its

maximum weight, or suspended from its

suspension points (M10 x 1.5PH, 30mm

length) (see example image). We do

NOT recommend suspending multiple

speakers in a vertical array.

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Alto-professional TS110A Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Acoustique Alto-professional TS110A