Alto-professional ZMX164FX USB Manuel d'utilisateur télécharger pdf (Page 6)

37 37

40 40

18. 2-TRACK INPUTS – You may connect these

inputs to the outputs of an external sound source

using a standard stereo RCA cable (sold

separately). You can send this channel to the

Solo Channel (using the CTRL ROOM SOURCE

"2 TK IN" switch) and/or the main mix (using the

2TK TO MIX switch).

19. 2-TRACK OUTPUTS – Connect these outputs to

the inputs of an external recording device using

a standard stereo RCA cable (sold separately).

20. LAMP – Connect a gooseneck lamp (12 V, 0.5

A, not included) to this BNC connector.

21. PHONES OUTPUT – Connect 1/4" stereo

headphones to these outputs. The PHONES

VOLUME knob controls the volume.

22. EFFECTS OUT VOLUME – Adjusts the volume

of the audio sent out of the DFX OUT from the

mixer's effects processor.

23. AUX 1/2 – Adjusts the level of the audio sent

from the effects processor out AUX SENDS 1

and 2.

24. EFFECTS SELECTOR – Selects the effect that

the mixer's internal effects processor will apply to

the various channels. Each channel can send

different levels of audio to the processor by

adjusting their FX POST SEND knobs. See the

EFFECTS section for an explanation of the

available effects.

25. VARIATIONS SELECTOR – Selects the amount

of the effect applied to the various channels.

26. FX MUTE – Press this button to mute/unmute

the effects.

27. FX PEAK LED – The LED will flash if the signal

is clipping. If this happens, decrease the setting

of the EFFECTS OUT knob. When the effects

processor is muted, the LED will be solidly lit.

28. POWER LED – Illuminates when the mixer is on.

29. PHANTOM POWER LED – Illuminates when the

PHANTOM POWER switch is on.

30. EQ ON/OFF – Enables or disables the

GRAPHIC EQUALIZER.

31. GRAPHIC EQUALIZER – When the EQ

ON/OFF switch is on (depressed), you can use

these controls to adjust the equalization of the

main mix.

32. AUX SENDS VOLUME – Controls the audio

level sent out the AUX SENDS.

33. AUX SENDS SOLO – When this button is

depressed, the audio signal being sent to the

AUX SENDS will also be routed to the Solo

Channel, which will become the only audio sent

to the PHONES OUTPUTS and CTRL OUTS.

The LED METERS will also display the audio

levels, which are controlled by the PHONES and

CTRL ROOM volume knobs.

34. AUX RTN VOLUME – Controls the audio level sent into the AUX RTN inputs.

35. AUX RTN TO AUX SEND VOLUME – Controls the audio level sent from the AUX RTN inputs back into the

Aux Channel.

36. AUX RTN 3 ROUTING SWITCH – Selects whether the AUX RTN 3 audio is routed to the CTRL ROOM mix

(when the button is depressed) or the main mix (when the button is raised).

37. AUX RTN 4 ROUTING SWITCHES – When these buttons are depressed, the AUX RTN 4 audio will be routed

to Su/jointfilesconvert/1710123/bgroup 1 and 2, Su/jointfilesconvert/1710123/bgroup 3 and 4, and/or the main mix.

38. AUX RTN SOLO – When this button is depressed, all AUX RTN audio will be heard in the Solo Channel, which

will become the only audio sent to the PHONES OUTPUTS and CTRL OUTS. The LED METERS will also

display the audio levels, which are controlled by the PHONES and CTRL ROOM volume knobs.

39. SUBGROUPS ASSIGN TO MAIN – Use these buttons to assign each su/jointfilesconvert/1710123/bgroup's left and right channels to the

main mix. When a button is pressed, that channel is being routed to the main mix.

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Alto-professional ZMX164FX USB Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Alto-professional ZMX164FX USB