Alto-professional Radius 200 Manuel d'utilisateur télécharger pdf (Page 11)

Troubleshooting

Problem Solution

The receiver does not

produce any sound.

Make sure the receiver’s power adapter is properly

connected to the power input and a power source.

Make sure the transmitter’s batteries are properly inserted

and that their polarities (+ and –) are correct.

Make sure the transmitter and receiver are set to the same

frequency.

Make sure the receiver’s audio output is properly connected

to your mixer, amplifier system, etc.

Make sure the receiver and transmitter are within 328 feet

(100 meters) and have a clear line of sight. Also, make sure

the receiver is not immediately near any metal objects or

devices that could cause RF interference (other wireless

systems, TVs, radio, etc.).

Lower the setting of the receiver’s Squelch knob.

There is audible interference

in the transmission.

Make sure the receiver and transmitter are within 328 feet

(100 meters) and have a clear line of sight. Also, make sure

the receiver is not immediately near any metal objects or

devices that could cause RF interference (other wireless

systems, TVs, radio, etc.).

Make sure the receiver’s antennae are properly attached to

its antenna terminals.

If you are using multiple transmitter-receiver pairs, make sure

the pairs are not using the same or adjacent frequencies.

The signal is distorted. Make sure the receiver is not immediately near any metal

objects or devices that could cause RF interference (other

wireless systems, TVs, radio, etc.).

Lower the setting of the receiver’s Volume knob.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 59 60

Pas de commentaire

Alto-professional Radius 200 Manuel d'utilisateur Page 11