Alto-professional TS112A Manuel d'utilisateur télécharger pdf (Page 2)

BOX CONTENTS

• TRUESONIC speaker

• Power cable

• Quickstart Guide

• Safety Instructions & Warranty Information Booklet

CONNECTION DIAGRAM / INSTALLATION

REAR PANEL OVERVIEW

1. POWER INPUT – Connect the included power cable

to this input and connect the other end of the cable to

a power source. Make sure the speaker's POWER

SWITCH is set to "off" when plugging and unplugging

the cable.

2. POWER SWITCH – Turns the speaker on/off. Make

sure the VOLUME knob is set to "zero" before turning

it on.

3. POWER LED – Illuminates when the speaker is on.

4. VOLUME – Turn this knob to adjust the speaker's

volume.

5. INPUT – Use a standard 1/4" TRS or XLR cable (not

included) to connect your sound source to this input.

6. MIX OUT – Use a standard XLR cable (not included)

to connect this jack to the input of another speaker

(i.e., another TRUESONIC speaker).

7. SIGNAL LIMIT LED – Illuminates when the audio

signal being sent to the speaker is "clipping" or

distorting. If this light illuminates frequently or

steadily, reduce the volume of your sound source.

8. CONTOUR – Engage (depress) this switch to

equalize the mix for optimal music playback. Disengage (raise) the switch during live performance for a

flatter response.

9. GROUND SWITCH – Press this switch to reduce hum or noise.

Note

Microphones, mixer,

and cables are not included.

Mixer*

Power

Microphones*

Speaker

Eyebolt

Dust cover

Suspension

point

Example:

INSTALLATION:

This speaker should be installed on a

stand on the floor, according to its

maximum weight, or suspended from its

suspension points (M10 x 1.5PH, 30mm

length) (see example image). We do

NOT recommend suspending multiple

speakers in a vertical array.

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Alto-professional TS112A Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Acoustique Alto-professional TS112A